• Sound Machine

  • Best of Analog

  • Best of Digital

  • Polyphonic Dream

Our Story

We are an instrument designer based in Palo Alto, California.
We are bringing the best of analog and digital together.
We are about to let you break new sound barriers.

Versatile

Start with a 16×16 32-bit audio interface.
Add a powerful FPGA-powered synthesizer.
Wrap into a 16-channel control surface.

Hybrid

Sample analog audio and control voltage signals.
Patch and process them in the digital domain.
Reach unprecedented levels of polyphony.

Open

Customize any of its printed circuit boards.
Develop user interfaces as web applications.
Open design hardware, open source software.

ISHIZENO i8 is an integrated sound machine.

Status

ISHIZENO i8 is currently under development. We are now in the process of gathering requirements and validating some of the core technologies that we are planning to integrate into the system, like the Zynq UltraScale+ MPSoC, or the XMOS XEF200 multicore microcontroller. If we do not hit any major roadblock, we hope to complete a first prototype in 2016, and a small production run the year after.

ISHIZENO i8 is designed by Ismael Ghalimi, who is neither a musician, nor an electrical engineer. Instead, he applies his expertise with software development and his unadulterated perspective on audio synthesis and sound processing to create something new and radical.

ISHIZENO i8

Audio Interface

16×16 audio interface with 32-bit sampling at 768 kHz.
Built-in digital mixer and audiophile headphones amplifier.

64 Channel Oscilloscope

32 × 32-bit audio sampling at 768 kHz.
32 × 16-bit CV sampling at 200 kSPS.

Hybrid Synthesizer

16 analog CV inputs and 16 analog CV outputs.
22 CPU cores, 3,528 FPGA DSP slices.

Wireless User Interface

Use any smartphone, tablet, or PC as user interface.
Connect to the system through Ethernet, USB, or WiFi.

Control Surface

9 motorized faders with dual 64-LED RGB bargraphs.
Shuttle wheel, 24 RGB illuminated knobs, 78 switches.

Optional Grid Controller

324 illuminated keys sensitive to pressure and velocity.
8 controls and 16 drum pads. Playing and sequencing nirvana.

Sound Machine


Length: 382 mm (15.04")
Width: 282 mm (11.10")
Height: 82 mm (3.23")

Powered by Xilinx Zynq UltraScale+ MPSoC

Anticipated retail price: $8,995

ISHIZENO i8 is modular and customizable.

Architecture

The ISHIZENO i8 is built in a modular fashion with customizable printed circuit boards: backplane, audio ADC, audio DAC, CV interface, channel controllers, headphones amplifier, and power supply. Above all, its design is optimized to reduce latency and jitter, while offering unprecedented levels of signal processing power and extensibility.

ISHIZENO i8 is analog and digital.

Audio Input

The ISHIZENO i8 can synthesize sounds from scratch, or sample up to 8 stereo audio channels. For this purpose, it embeds a studio-grade audio interface made of 8 independent analog-to-digital converters. Each converter is mounted on a 102 × 42 mm board, making the design fully upgradeable, and allowing different converters to be used in parallel for different channels.

By default, each audio ADC module is built around the AK5397EQ analog-to-digital converter, which supports 32-bit sampling at 768 kHz, with an ultra-low signal-to-noise ratio of +127 dB. Two balanced audio inputs are fed to the converter through input buffers and four LME49990 ultra-low distortion, ultra-low noise operational amplifiers.

In order to preserve the purity and richness of the original signal, each module includes eight power regulators: one LM78L15 for +15 V, one LM79L15 for -15 V, and six ultra-low noise ADM7150 linear regulators (left & right 5 V analog, left & right 5 V bias, left & right 3.3 V digital). Furthermore, all resistors are aerospace-grade components with an ultra-low tolerance of 0.01%.

The printed circuit board (PCB) used for each module is made of two layers only, with all analog and digital signals being routed on the top plane. The bottom plane is used for power and grounding, with fully-separated analog and digital sections connected directly under the converter. Traces are never thinner than 16 mils, while most analog input and power traces are 32 mils, ensuring very low impedance. Additionally, no via is ever used by more than one trace, and all traces are carefully rounded and follow a 45 degrees routing pattern.

Each module is connected to the backplane through a 62-position card edge connector with a low impedance pitch of 2.54 mm and a 500 V rating. When using the AK5397EQ analog-to-digital converter, all 19 digital I/Os made available by the converter are routed to the backplane's FPGA through the edge connector, while leaving 6 top-plane positions available for future upgrades, and using all 31 bottom-plane positions for grounding.

This design enables the FPGA to control all parameters of the converter, in a fully programmable fashion, including 12 types of audio data interface formats, sampling speed, digital high pass filter, overflow detection, mono mode, power down, and reset. Most importantly, the 3,528 DSP slices of the FPGA fabric can be used to implement highly sophisticated filters in the digital domain, with ultra-low latency, 32-bit precision, and 3.072 MHz oversampling or more.

In order to reduce jitter from the femto clock to the converter, the master clock signal is not routed from the backplane to the audio ADC modules through their card edge connectors. Instead, 8 coaxial cables of equal length are connected from the backplane's clock distribution section to the 8 modules, using U.FL ultra small surface mount coaxial connectors.

 

Specifications

Faceplate

1 × tablet holding groove

1 × 55 mm Avago shuttle wheel

9 × 100 mm Penny+Giles motorized faders

9 × 100 mm dual 64-LED RGB bargraphs

24 × Bourns rotary encoders with 32 PPR and SPST switching

24 × knob illumination rings with 32 RGB LEDs

78 × illuminated switches


Core Engine

Xilinx Zynq ZU15EG MPSoC

Quad-core ARM Cortex-A53 MPCore up to 1.3GHz

Dual-core ARM Cortex-R5 MPCore up to 600MHz

Mali-400MP GPU up to 466MHz

Xilinx Virtex 16 nm FPGA fabric

597K logic cells

3,528 DSP slices

XMOS XEF200 multicore microcontroller

16 × real-time processing cores

2,000 MIPS

Pulsar femto clock


Audio Input

8 × AK5397EQ analog-to-digital converters on individual boards

8 stereo channels

32-bit resolution

768 kHz sampling rate

+127 dB SNR

–108 dB THD+N

Balanced inputs

Buffers for line inputs

U.FL coaxial connector for master clock


Audio Output

16 × discrete R-2R sign magnitude DAM on individual boards

8 stereo channels

32-bit resolution

3.072 MHz oversampling rate

Balanced outputs


CV Section

16-channel 16-bit analog-to-digital CV levels converters

16-channel 16-bit digital-to-analog CV levels converters

16 × 3.5 mm TRS analog CV inputs

16 × 3.5 mm TRS analog CV outputs

32 × RGB LEDs

Automatic CV output calibration

Converter temperature control


Amplifier

Pop-noise suppression

2 µm Ag gold-plated headphones sockets


Backplate

On/Off switch

Kensington security slot

100-240v IEC power connector

Device USB 3.0 connector

Host USB 2.0 connector

Device USB-C connector

Host USB-C connector

AVB Gigabit Ethernet RJ45 connector

Gigabit Ethernet RJ45 connector

Coaxial S/PDIF input connector

Coaxial S/PDIF output connector

Optical ADAT + S/PDIF input connector

Optical ADAT + S/PDIF output connector

2 × DB25 8-channel balanced inputs connectors

2 × DB25 8-channel balanced ouputs connectors

2 × XLR male audio outputs connectors for studio monitors Δ

2 × XLR male audio outputs connectors for studio monitors Σ

2 × BNC connectors for world clock input

2 × BNC connectors for world clock output

16 × SMA connectors for 16.3Gb/s GTH transceivers


Frontplate

6.35 mm TRS stereo headphones jack

SD Card port


Dimensions

Length: 382 mm (15.04")

Width: 282 mm (11.10")

Height: 82 mm (3.23")

ISHIZENO i8 is progressive and radical.

Software

ISHIZENO i8 is designed to be as open as possible, across all layers of the software stack:

ISHIZENO i8 is open hardware and open source.

G3 Grid

The g3 is an optional companion to the i8.
324 keys and 16 pads sensitive to pressure and velocity.
8 customizable controls for mode selection and track transport.


Length: 910 mm (35.83")
Width: 215 mm (8.36")
Height: 31.4 mm (1.24")

While the module can be used with any USB controller, it is being developed jointly with a grid controller, the ISHIZENO g3. This grid is made of 324 keys, 16 drum pads, and 8 controls. Keys, pads, and controls are illuminated by RGB leds and are sensitive to pressure and velocity.

The controller is made of a black walnut frame and is controlled by an embedded Raspberry Pi 2. It also provides a longitudinal groove capable of holding up to 8 tablets in a semi-vertical position, and can be extended with left and right docks for hosting one or two tablets horizontally.

Mixing

8 rows of 36 keys for channel level setting, 1 row for master output level.

Playing

8 rows of 36 keys for playing across 3 octaves, 1 row for sequencing.

Sequencing

8 rows of 36 keys for multi-channel sequencing, 1 row for note selection.

Anticipated retail price: $1,995

An entire studio in your backpack

Reserve Now

Raison d'être

  • Providing a mixed interface (analog × digital) for processing mixed signals
  • Integrating multiple audio functions into a single portable device
  • Simplifying the development of rich user interfaces running on any device

Our fans

Our Skills

95%

Web

75%

C++

60%

Digital

40%

Analog

Our Numbers

16

Audio Channels

2,027

LED indicators

3,528

DSP Slices

Keep in touch

Want to learn more? Contact us at info at ishizeno dot com or follow our blog